VintageKustom.com - RDF feed
http://www.vintagekustom.com/FUDforum/index.php
Thermal Sensor K-150-6
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=11378&th=2116#msg_11378
Have a DOA Elmwood Sensor 2455 on this combo K-150-6 serial 81628. Shop tech has substituted a sensor from another application for brief test. It powers up previouly dead amp, plays fine. Can anyone give me the schematic values for this sensor (better yet, schematic!)or recommend a replacement part (maker & number) and source? It is round with two spade connectors; screws down with retainer ring. I'm not a tech so I apologize in advance if I've left out info you need. Flying blind, you see. Your assist is much appreciated. Thanks, in advance.]]>navigio2009-07-08T00:31:42-00:00Re: Thermal Sensor K-150-6
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=11383&th=2116#msg_11383
stevem2009-07-08T09:48:27-00:00Re: Thermal Sensor K-150-6
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=11384&th=2116#msg_11384
navigio2009-07-08T13:06:43-00:00Re: Thermal Sensor K-150-6
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=11407&th=2116#msg_11407
navigio2009-07-11T01:00:50-00:00