VintageKustom.com - RDF feed
http://www.vintagekustom.com/FUDforum/index.php
D-130 cabinet
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=20916&th=3834#msg_20916
I know that originally this cabinet was intended for guitar, but have made it into bass/PA since that is what I play. Face board is inverted just like Pleat suggested; (2) Eminence Delta 15B speakers will be wired separate to speaker jack for playing bass. For PA, have Altec 811B horns, Selenium D22oTi-16 drivers, 16 ohm/100 watt L-Pad attenuator; high-pass 8 ohm 3,000Hz 100 watt crossover, and of course the driver adapter plate. All of this will be in a separate horn cabinet on top of speaker cabinet.
My plan is to add an additional jack to horn cabinet and another one into the speaker cabinet this way I can use the horn and the top speaker as a separated speaker cabinet when running as a PA and also use the bottom two speakers as a separate speaker cabinet. Now I should have (4) output sources so that I can use all 4 speaker jacks on my 400 series amps.
I know it sounds like a lot of work but hope this will actually be functional.
Since the crossover claims that 75% of the power will go to the woofer and the rest to the horn, would using an 8 ohm speaker instead of a 16 cause any problems? And did I order the right crossover.....was concerned about the 3,000Hz since this horn has a minimum crossover frequency of 1200 Hz.
]]>rodak2014-07-10T18:52:07-00:00Re: D-130 cabinet
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=20918&th=3834#msg_20918
Is the crossover I bought ok to use with all this?]]>Iowa Boy2014-07-10T19:28:45-00:00Re: D-130 cabinet
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=20920&th=3834#msg_20920
pleat]]>pleat2014-07-10T23:41:52-00:00Re: D-130 cabinet
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=20926&th=3834#msg_20926
Think we are set for speaker cabinets now.......just have to get them put together. The thread on using garbage disposal flange for port tube was a great idea....and only $30 for a set.....and they are chrome metal! Will do until real chrome ports are located.
Will be in touch when start messing with amp heads. Sure I will have lots of questions for you guys.
Again, I can not thank everyone enough for all your help. Couldn't have done it with out you all. You guys are ROCK STARS!!!!!]]>Iowa Boy2014-07-11T19:34:34-00:00