VintageKustom.com - RDF feed
http://www.vintagekustom.com/FUDforum/index.php
K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27310&th=4705#msg_27310
Joe Tritschler2019-05-13T18:03:03-00:00Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27311&th=4705#msg_27311
What I have done is to get 8 short machine screws and nuts and them embedded the screw heads in clears silicone bath tube sealer.
This is a two step process.
First I place a 1/4" dab of sealer on the head of a screw and then push another screw agonist it so that there is still 1/8" between the head of each screw.
Do this on wax paper and let it set up overnight, the next day pack more sealer around the 2 screw combo to retain them to each other better.
When you do the final Assy of the pan back in the amp do not tighten up the nuts too much or you will spin out the screws, but this method does work!]]>stevem2019-05-14T11:36:56-00:00Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27373&th=4705#msg_27373
Joe Tritschler2019-06-08T02:28:42-00:00Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27498&th=4705#msg_27498
him for clues. I've been looking here on this site for that exact model for months with no avail so I'd keep it if I were you. . .those babies are pretty hard to come by. They're definetly 'out there' as in not 'extinct' but pretty rare. I want to run my Wurli thru one of those cuz my freind said they're great for that
especially the tone booster mid-range thingy. . .not to mention speed controlled vibrato and tremolo. . .WOW!
Jake]]>johnnysynth2019-09-11T15:45:36-00:00