VintageKustom.com - RDF feed
http://www.vintagekustom.com/FUDforum/index.php
200A vs 200B
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27903&th=4815#msg_27903
Is there any printing on the jack plate on the 200A speaker cabinet? I need one of those too. Do you know anyone who might have one to sell? Finally, the 200A head is missing the two front feet and the back two feet are black plastic while my 200B feet are metal and shorter. Are the black plastic feet original?
Overall, I'm fairly impressed with the build quality of Kustom amps. The chrome ports on the 200B look much nicer than the (clear-coated?) brushed Aluminum ports mounted with 3 screws on the front. The clear coat has yellowed significantly on the 200A ports. Interestingly, the 200B head weighs 32 lb while the 200A head weighs 26 lb. Four of the pounds are in the head cabinet, which was surprising. Usually, manufacturers try to trim weight over time, not increase it, especially that much.
Thanks,
Steve]]>shonodel2020-10-20T16:36:06-00:00Re: 200A vs 200B
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27904&th=4815#msg_27904
From what I have seen the early A series heads had plastic feet, if yours did not then the outline of the later metal bigger feet will likely still be seen.
For metal replacements I use a set of 4 P-H251 from Antique electronics.
For a replacement speaker jack plate I use there P-H100X.
I believe the A series speaker cabinets had jack plates labeled for what speakers are in it, and if you want that your going to have to get a guy that makes custom and replacement face plates to do that up for you.
For handles your not going to find any replacement even close so your only hope is to turn up a set of decent used ones!]]>stevem2020-10-21T11:14:28-00:00Re: 200A vs 200B
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27905&th=4815#msg_27905
shonodel2020-10-21T16:42:43-00:00Re: 200A vs 200B
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27906&th=4815#msg_27906
stevem2020-10-21T17:32:47-00:00Re: 200A vs 200B
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=27909&th=4815#msg_27909
pleat]]>pleat2020-10-23T02:18:08-00:00