VintageKustom.com - RDF feed
http://www.vintagekustom.com/FUDforum/index.php
Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28343&th=4907#msg_28343
The shaft has been broken on my amp....
Is there any other amplifiers that has this control on them?
Thanks for your help...]]>jammy51522021-10-08T10:49:50-00:00Re: Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28345&th=4907#msg_28345
Antique electronics supply has part number r-vs-500ka pot with the needed switch on its back, but you will need to hard wire this switch into the board since it's not a circuit board Mount style .
Also this comes with a long shaft that you will have to hacksaw back to the length you need.
If you use this when you cut it be double sure no metal filings get into the pot, so tape it off.]]>stevem2021-10-08T20:19:15-00:00Re: Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28347&th=4907#msg_28347
You would have to take the original 300K pot apart and fit the resistance wafer into the new pots casing, but it would get you a working replacement.]]>chicagobill2021-10-17T00:26:08-00:00Re: Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28352&th=4907#msg_28352
jammy51522021-10-21T11:01:26-00:00Re: Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28353&th=4907#msg_28353
stevem2021-10-21T15:28:41-00:00Re: Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28354&th=4907#msg_28354
The pull switch selects between trem and vibrato.]]>chicagobill2021-10-21T15:42:55-00:00Re: Kustom 50-2 Amplifer
http://www.vintagekustom.com/FUDforum/index.phpindex.php?t=rview&goto=28553&th=4907#msg_28553
Correct on the 500 k pot....
I have gotten on from eBay that has the same makeup as the old pot EXCEPT it's a 1.5 k so I'll remove the shaft and fit it into my old one...
I'd like to add a picture here If I could
Thanks