VintageKustom.com: Repairing Kustom Amps » Burnt Output resistor value?

Home » VintageKustom.com » Repairing Kustom Amps » Burnt Output resistor value?

Show: Today's Messages :: Polls :: Message Navigator

Burnt Output resistor value? [message #2761]

Wed, 28 May 2003 21:56

glp
Messages: 2
Registered: May 2003

Junior Member

I have a Blue Sparkle Kustom head. Label on rear says the model number is 0795?? Anyway, sent smoke signals the other day. Found the speaker jack completly covered in rust, etc. Replaced that. Opened it up and found a resistor from the output tranny so burnt I cannot tell what its value was?? Anyone help me out?? It was a 1/2 watt carbon tied across a terminal strip that both leads of the output tranny coming to it. I assume something else is wrong to cause this so any suggestions would be helpful as well! thanks in advance!

Report message to a moderator

Re: Burnt Output resistor value? [message #3001 is a reply to message #2761]

Sat, 16 August 2003 02:53

Anonymous

I have a 695 "Frankenstein" head, and it has a 82 ohm (grey, red, gold, silver stripes) resistor in that position. I hope this helps. I'm trying to fix mine without a schematic, what a pain!

Report message to a moderator

Re: Burnt Output resistor value? [message #3002 is a reply to message #3001]

Sat, 16 August 2003 18:11

Roy
Messages: 11
Registered: June 2004

Junior Member

I take it back, it's a 8.2 ohm resistor. Sorry about that.

Report message to a moderator

Previous Topic:	RCA female jack on back of amp
Next Topic:	cross ref transistor base configuration

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jun 25 16:12:46 EDT 2024