VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Challenger Reverb Problem
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Challenger Reverb Problem [message #27115] Sat, 01 December 2018 17:16 Go to previous message
ARKustom is currently offline  ARKustom
Messages: 37
Registered: January 2014
Location: United States
Member
I just got one of these and can't get the reverb to work. When I bought it the reverb only made a loud hum when the knob was turned up, so I got the guy to come off the price. When I opened it up to clean and inspect connections, one of the reverb springs was loose. The ferrite beads were loose in the reverb pan, so I bought a replacement pan. I got it today and connected it, still no reverb. It will crash, so the output works, The background hum increases when the reverb knob is turned up (not like the loud hum before), but there is still no reverb effect. Any ideas? It seems like none of the signal is getting diverted through the reverb tank.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K300 help
Next Topic: K200A-1 Power Amp Rescue Needed
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 05 22:02:25 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software