Home » VintageKustom.com » Comment Board » looking for info
looking for info [message #9252] Fri, 22 February 2008 08:00 Go to next message
rob7117 is currently offline  rob7117
Messages: 2
Registered: February 2008
Junior Member
I have a Kustom head model # is 200 A-1. The serial number apears too have been tampered with, it looks like the number was 21130 but someone has tried to stamp a 3 over the first 1 making the number 23130. if anyone can give me any info on this head i would appriciate it. Rob
Re: looking for info [message #9256 is a reply to message #9252] Fri, 22 February 2008 12:53 Go to previous messageGo to next message
LesS is currently offline  LesS
Messages: 477
Registered: December 2002
Senior Member
It was not tampered with.
This was done at the Kustom factory.
Some of the 21xxx serial numbers were overstruck to make them 23xxx serial numbers.
We do not know why this was done.
Only the 21xxx series of serial numbers were overstruck.

Your K200A-1 was made about Jan/Feb 1968 and is 100 watts RMS at 4 ohms. For more info on your amp, search this site for K200A or K200A-1.
-Les S
Re: looking for info [message #9258 is a reply to message #9256] Fri, 22 February 2008 21:25 Go to previous messageGo to next message
rob7117 is currently offline  rob7117
Messages: 2
Registered: February 2008
Junior Member
any ideas on finding the right speaker encloser for this head?
Re: looking for info [message #9263 is a reply to message #9252] Mon, 25 February 2008 06:26 Go to previous message
stevem is currently offline  stevem
Messages: 4739
Registered: June 2004
Location: NY
Senior Member
That head could have come with a number of different cabinets. The most common one sold would be a 2-15" loaded with with 2 CTS drivers for bass, or 2 Jensen C15L drivers for guitar, or the next step up would be a 3-15" version of each cabinet.
You can view these in the literature section on this site.
Previous Topic: New T&R PA cabs
Next Topic: 15 inch speakers
Goto Forum:
  


Current Time: Sat May 25 22:15:27 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.