Home » VintageKustom.com » Comment Board » Audio Power Module KPN 200 -0167 in X2-15 B(Looking for knowledge/help with combo of K200B 1 with audio power module)
stevem Messages: 4739 Registered: June 2004 Location: NY
Senior Member
So let me get this straight, you have only one speaker cabinet, and that's the one with what Kustom called a power module in it?
Those cabinets was for the later 1971 and up 250 series amps that you could up grade to a 500 series with the added self powered cabinet.
If you only have this one cabinet then you have a choise, either get a adapter cable to go from the RCA jack on the rear of your 200 head into the input on the powered cabinet, or remove the rear of the cabinet unhook it's speaker cable from the amp and unhook its input jack wires from the amp and the solder those speaker wires to that 1/4" jack that was the input to the amp.
Then your 200 head can power those speakers.
Note that most of those 2-15" powered cabinets that where sold where for Bass, so if your intent is to play guitar thru it, it may lack some high end to you.
PS, you can run the 200 head without a speaker load on it and no harm will come to it.