VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom Bass III Channel 1 Hiss (extreme amount of hiss on channel 1 board (PC5127))
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom Bass III Channel 1 Hiss [message #28686 is a reply to message #28685] Fri, 22 July 2022 10:03 Go to previous messageGo to previous message
thespeakerport is currently offline  thespeakerport
Messages: 11
Registered: July 2022
Junior Member
Each channel board has two molex connectors...one that goes to the input jacks and the other for power and signal output. The hiss is present if you have then connector that goes to the input jacks plugged in or not. I will absolutely post the schematic in about an hour when I get back to my shop.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom IV Bass Power Supply Caps
Next Topic: K200 Bright Channel is ALIVE...
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 12 09:33:00 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software