Home » VintageKustom.com » Comment Board » "to module input"?
"to module input"? [message #16060] Mon, 12 September 2011 12:27 Go to next message
Destruksean is currently offline  Destruksean
Messages: 3
Registered: September 2011
Junior Member
I just picked up a kasino U-200 i believe is the model for $50 and an old guitar. Being a guitar player i like the muddy sound i get out of the head with my sg gothic and a big muff. My question is, on the back of the kasino are 4 "to module input" jacks, are these line outs? I have an orange thunderverb 50 head that i would like to try different master/slave configurations and without a line out on the orange, i wanted to try slaving the orange in the name of science and to quell my curiousity. It would have been nice if they would have just put a line out on the orange instead of 3 different footswitch jacks, it has an fx loop but needs to have the return run back the the amp rather than letting me use the send as a line out. So if anyone can shed some light on the to module input's for me theyll have a big fat high five comin their way. Thanks.
Re: "to module input"? [message #16063 is a reply to message #16060] Mon, 12 September 2011 17:50 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
To module inputs are line out jacks. The Kasino didn't have a line in if I remember correctly. An easy way to do a line out on the Orange amp is use a mono Y cable from the effects out jack, use lead of the Y cable to feed the effects return jack on the orange and the other lead of the Y cable feeds the external power amp you want to use.
pleat
Re: "to module input"? [message #16069 is a reply to message #16063] Mon, 12 September 2011 19:56 Go to previous messageGo to next message
Destruksean is currently offline  Destruksean
Messages: 3
Registered: September 2011
Junior Member
Good idea on the y split back to the fx return. Gonna try it.
Re: "to module input"? [message #16073 is a reply to message #16069] Tue, 13 September 2011 20:03 Go to previous messageGo to next message
Destruksean is currently offline  Destruksean
Messages: 3
Registered: September 2011
Junior Member
Well my ears are still ringing 2 hours later. Using a y splitter from the send return worked..its glorious. Thanks for the tip pleat!
Re: "to module input"? [message #16074 is a reply to message #16073] Wed, 14 September 2011 08:18 Go to previous message
pleat is currently offline  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
Glad it worked for you.
pleat
Previous Topic: Kustom T-Shirts?
Next Topic: Its Sparkle White
Goto Forum:
  


Current Time: Thu May 23 10:07:54 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.