VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » reverb issue
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: reverb issue [message #13300 is a reply to message #13234] Sat, 27 March 2010 12:01 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
OK, what brand cap? What is the Mouser part number?
If the line is broken, does it break into minus signs?

Yes, the data sheets will be helpful, also if you get a transistor tester, it may help you to identify the pinouts.

The most common pinout for any American brand TO-92 is EBC. I always assume this is the case, but a quick check with a meter will verify the base and the type (NPN or PNP).
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Reverb issue again!!
Next Topic: Frankie Confusion
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Tue Jun 11 23:05:06 EDT 2024