VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » 3/8 flowerette bolts for pa stand
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
3/8 flowerette bolts for pa stand [message #15236] Wed, 09 February 2011 09:04 Go to next message
conductortom
Messages: 96
Registered: July 2010
Location: Okla
Member
Anybody got a couple of flowerette head thumb bolts for a pa stand? I need a couple. Thanks, Tom

Report message to a moderator

Re: 3/8 flowerette bolts for pa stand [message #15294 is a reply to message #15236] Wed, 23 February 2011 15:57 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
If you go on line and look at the McMaster Carr supply listing you will find them under the listing of Thumb screw/rosette type.

Report message to a moderator

Re: 3/8 flowerette bolts for pa stand [message #15295 is a reply to message #15294] Wed, 23 February 2011 16:12 Go to previous message
conductortom
Messages: 96
Registered: July 2010
Location: Okla
Member
Thanks Steven,
I found some at grangers.Not exactly what I wanted, but works. I'll check the ones at McMaster carr. Thanks again
Tom

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kasino Grill Cloth
Next Topic: Kustom PA Horns
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 14 16:12:05 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software