Jerrybass1955 Messages: 45 Registered: August 2014 Location: NC
Member
Wow! You guys are a wealth of information. I should be able to start work on this guy tomorrow night and I am looking forward to checking out your suggestions. A couple of follow up questions:
"The schematic for the K100-2 at this site is pretty clear...better than most." - having trouble finding it. Can you give me a link or other ideas to get there?
"tantalum caps" - can you get by with aluminum or polyester caps, or should I order some tantalum caps?
"reverb" - I don't know if it is working. I don't have a foot switch. I guess I can easily use a dummy plug, but I don't remember having to have the footswitch plugged in to get the reverb to work, but that has been about 25 years ago or so. From the schematic, it looks like the switches are open to turn it on though. Correct me if I am wrong. And BTW, does anyone know where to get a real live Kustom footswitch?
Looks like the input transistor might be the culprit. I have hundreds of 2n3904 and 2n3906 - do they seem to be as sensitive to failure from static, etc.?
I took a quick look inside last night and wondered if there is anything holding the circuit board in place other than the pots and maybe the jacks?
First order of business is to get that power cord replaced with a 3 wire. I have a 15 foot cord ordered that should arrive tomorrow and after I get that done, the fun begins.
Thanks for the great tips guys. I'll keep you posted, and keep the advice coming!