VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » K100-2 Hiss but no other output (Need help troubleshooting)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K100-2 Hiss but no other output [message #21183 is a reply to message #21163] Fri, 15 August 2014 14:12 Go to previous messageGo to previous message
Jerrybass1955 is currently offline  Jerrybass1955
Messages: 45
Registered: August 2014
Location: NC
Member
Just a quick update. The PB Blaster and a good fitting screwdriver did the trick and saved the knob. After I got the knob off, I pulled the circuit board and replaced the input transistor with a 2N3904. I also used the opportunity to clean up the jacks a bit. Unfortunately I ran out of time last night, so I hope to put the amp back together today and check out the repair. Wish me luck!
Jerry
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: trem-vib distortion on my k150-8 and k100-8
Next Topic: Do I actually have a Frankenstein??
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 15 18:45:15 EDT 2024