VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » Repair (K150-8 noise)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Repair [message #28499 is a reply to message #28494] Thu, 07 April 2022 16:25 Go to previous messageGo to previous message
NLKustom is currently offline  NLKustom
Messages: 50
Registered: March 2022
Member
Thanks for the help Steve.
So I checked the tank again, the RCA chord going to the "input" jack is not showing 0 on the ohm meter on the shield connectors.
The RCA chord going to the "output" jack is showing 0 on the ohm meter, so I'm assuming it's shielded.
The reverb tank has the "input" jack farthest away from the power transformers, looking at it from the front of the amp., and the "output" jack is closest to the transformers, or in the middle of the amp.
The tank is an Accutronics, these are the numbers stamped on it. 031-005-00. 25-75-301. 23572-0. 4FB2A1A. It looks like someone has peeled back the foam on both ends of the tank for some reason, to look inside I suppose. Everything looks fine in there, the foam is still in place.
When I shake the amp I can hear the reverb springs through the speakers.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Bass filter for cabinet
Next Topic: K250
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 05 07:21:08 EDT 2024