VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Replacement Kustom control knobs
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Replacement Kustom control knobs [message #24232 is a reply to message #24221] Wed, 16 December 2015 11:51 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
Steve- I don't think that the ones that Ampeg used were the same, as the center section on the Ampegs were shaped on one end to form a pointer. The ones I've seen on Kustoms were just straight across.

Gary- You can look at the parts inside the amp and see if you can read any of the date codes. They will not give you an exact date, but at least that will get you in the ballpark.

On the front panel of the Frankies in the center, there is a Kustom logo and a byline. What does yours say there?

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Replacing 15s with Kappalite 3015 Neo
Next Topic: Kasino Concert Lead
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Sep 19 22:08:56 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software