VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » Handles and Casters with the plates
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Handles and Casters with the plates [message #26661] Sat, 14 April 2018 05:46 Go to next message
Snodgrass is currently offline  Snodgrass
Messages: 139
Registered: January 2008
Location: Bartlesville, OK
Senior Member
Just seeing if anyone has a set of casters with the mounting plates for one of my 2x12 cabs. And I'm also looking for handles I currently need around 20 so I would be willing to take whatever you have.

And I am still looking for a case for my Kustom K200 Bass.

Thanks.

Report message to a moderator

Re: Handles and Casters with the plates [message #26662 is a reply to message #26661] Sun, 15 April 2018 07:01 Go to previous message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
the casters can be had from Grainger supply , # 5X758 for 8.95 each.
The long caster mounting plate you are going to have to make from Alimunum bar stock which can be had from most hardware store, or once again from Grainger.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: FOOT PEDAL
Next Topic: Would Like to buy Older Frankie head and Cab!
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 14 18:07:34 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software