VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » handles (new handles for the cabinets)

Show: Today's Messages :: Polls :: Message Navigator

Re: handles [message #28115 is a reply to message #27943]

Sat, 13 March 2021 18:00

RPatt
Messages: 7
Registered: December 2020

Junior Member

it's kind of amusing that a lot of musicians have viewed this post. Apparently, the original handles were breaking all the time. As far as I can tell, the only difference between the old ones and the new ones is, the old ones used a brad while the new ones use a screw. If these are prone to break, maybe it would be a good idea to take them apart and reinforce the screw posts with some kind of epoxy dough. That's great that the plastic insert fits the old hardware if you want to keep things as original as possible. I figure, once again you could fill the screw holes with JB weld or some other epoxy and set the brad into the glue before it hardens.

Report message to a moderator

[Message index]

		handles By: RPatt on Sat, 26 December 2020 21:28
		Re: handles By: oren hudson on Wed, 30 December 2020 10:55
		Re: handles By: RPatt on Wed, 30 December 2020 11:07
		Re: handles By: oren hudson on Sun, 03 January 2021 10:27
		Re: handles By: oren hudson on Tue, 12 January 2021 21:25
		Re: handles By: Jo Nathan on Mon, 08 February 2021 03:02
		Re: handles By: stevem on Wed, 13 January 2021 07:14
		Re: handles By: stevem on Mon, 08 February 2021 13:59
		Re: handles By: Cody UNO on Mon, 08 February 2021 18:20
		Re: handles By: RPatt on Tue, 09 February 2021 14:29
		Re: handles By: stevem on Tue, 09 February 2021 06:18
		Re: handles By: DocWaxham on Sat, 13 March 2021 13:00
		Re: handles By: Cody UNO on Wed, 17 March 2021 04:50
		Re: handles By: Cody UNO on Mon, 15 February 2021 04:12
		Re: handles By: Cody UNO on Fri, 05 March 2021 21:47
		Re: handles By: DocWaxham on Fri, 12 March 2021 13:22
		Re: handles By: Cody UNO on Sat, 13 March 2021 03:09
		Re: handles By: RPatt on Sat, 13 March 2021 18:00
		Re: handles By: RPatt on Mon, 07 June 2021 21:13
		Re: handles By: stevem on Tue, 08 June 2021 07:07
		Re: handles By: Doombuggy! on Sat, 11 September 2021 15:26
		Re: handles By: stevem on Sun, 12 September 2021 07:24
		Re: handles By: pleat on Sun, 12 September 2021 10:34
		Re: handles By: RPatt on Tue, 21 December 2021 19:56

Previous Topic:	Legend Amplification replacement knobs
Next Topic:	Looking for help with a 150 4x10 with Trem-Vibe

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jun 12 15:20:35 EDT 2024