VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Kustom for guitar
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom for guitar [message #4197] Sun, 16 May 2004 06:22 Go to next message
QModer
Messages: 413
Registered: June 2003
Senior Member
I used my 2x10/2x12 Kustom cab and head for guitar the other night. I have just gotten a new Rickenbacker and the Kustom is one of the best sounding amps that I have for it. However the reverb is not working. Is that pretty simple to repair?

Report message to a moderator

Re: Kustom for guitar [message #4200 is a reply to message #4197] Sun, 16 May 2004 12:29 Go to previous messageGo to next message
BC
Messages: 583
Registered: March 2000
Location: Kentucky
Senior Member
Many times it is simply a loose wire or broken wire in the reverb pan....but there can be circuit issues as well. Pull the amp from the cabinet and check the two RCA connectors first....then uncover the pan and see what is inside. KEEP AWAY FROM THE FILTER CAPS! Look very close at the coils where the connections are made. There should be one at each end of the pan between the springs and the RCA cables. I have seen several of these with broken connections. If this is the case try swapping in another pan. BC

Report message to a moderator

Re: Kustom for guitar [message #4202 is a reply to message #4200] Sun, 16 May 2004 18:20 Go to previous messageGo to next message
QModer
Messages: 413
Registered: June 2003
Senior Member
Thanks BC I'll try that on it next and just see if everything is connected.

Report message to a moderator

Re: Kustom for guitar [message #4205 is a reply to message #4202] Sun, 16 May 2004 23:26 Go to previous message
QModer
Messages: 413
Registered: June 2003
Senior Member
I took the head out of its cab and there are no loose wires. I did discover however that it causes the amp to hum when the reverb is turned up.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: All Kustom Stage........Finally!!!!
Next Topic: Kustom Combo Amp
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jun 10 20:04:43 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software