New Kustom owner Looking for Schematics [message #14854] |
Fri, 10 December 2010 15:39 |
JoeT
Messages: 13 Registered: December 2010 Location: Wynantskill, NY
|
Junior Member |
|
|
Hello everyone. Just purchased my first Kustom a couple of weeks ago, a K100-1 with 2x12 bottom. K100 wasn't working, but was able to find the drawings, PC103, and repaired. Picked up a
K100-2 with a 2x12 bottom last night. Head works but has issues.
Looking to see if someone might have a schematic for the K100-2.
I believe from searches I have done that has a PC104 board.
If anyone has that schematic I would apreciate a copy. Hate to go poking around blindly. By the way both units I picked up are black. The K100-1 head and bottom were both in excellent condition, only 1 small tear on the bottom. The K100-2 head and bottom are in fair condition but I'm seriously considering redoing the tuck & roll myself. Probably charcal or cascade, have not decided yet.
Thanks Joe Treiber
|
|
|
Re: New Kustom owner Looking for Schematics [message #14856 is a reply to message #14854] |
Fri, 10 December 2010 18:02 |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
Hey welcome to the place.
I don't have the schematic that you need, but I'm sure someone here will be able to send you one.
I'd love to see how the re-covering works out. I've always wanted to learn how to do that.
Again, welcome.
|
|
|
|
|
|
|
|
Re: New Kustom owner Looking for Schematics [message #14882 is a reply to message #14854] |
Tue, 14 December 2010 11:35 |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
That reverb control response may be normal. I haven't looked at the schematic yet, but most Kustom amps were designed so that when you turn up the reverb control, it increases the reverb signal and reduces the straight signal. More like a balance control.
|
|
|
|
|
|
|
|
|
Re: New Kustom owner Looking for Schematics [message #29303 is a reply to message #14854] |
Wed, 31 July 2024 05:43 |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
When you log onto this site down below the webboard button is the one that says technical.
Once you open that hit the line that's says amps by model and you will see the tab to open the K100-2 schematic.
They can also be bought from the Musicparts site and they will send it right to your email.
[Updated on: Wed, 31 July 2024 05:44] Report message to a moderator
|
|
|