VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » Glides on bottoms of cabinets & heads
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Glides on bottoms of cabinets & heads [message #5097] Thu, 18 November 2004 14:41 Go to next message
boogie brother is currently offline  boogie brother
Messages: 11
Registered: June 2004
Location: Myrtle Beach, SC (USA)
Junior Member
I'm having a bit of a hard time trying to locate some of the correct size of the chrome feet or "glides" that Kustom employed on their amp heads and some of their cabinets. They were the size of a 50 cent piece and screwed in, or nailed in. Can anyone point me in the right direction, or know of a source? I'm sure that I'm not alone in needing these! I have found the smaller "Fender" style glides available at Mojotone, but I really want those big ones! HELP...........PLEEZE! Confused

Boogie Brother
Re: Glides on bottoms of cabinets & heads [message #5104 is a reply to message #5097] Fri, 19 November 2004 17:22 Go to previous message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
The only ones I have seen that are close enough to work are the repro ones for fender amps.You can view them on the ampwares site.
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: amp case for K200
Next Topic: Power lamp replacement procedure 150/250/300 series
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 13 15:55:22 EDT 2024