VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Cracked A-4 Plexi (Pulled a John Fogerty!)

Show: Today's Messages :: Polls :: Message Navigator

Cracked A-4 Plexi [message #26493]

Wed, 24 January 2018 18:32

Shaun_Musings
Messages: 323
Registered: April 2009
Location: Reading, MA

Senior Member

Hey, everyone, I have three Kustom A-4 heads (1967 with two circuit breakers SN #16767, 1968 #20084, 1968 #21242). I somehow managed to crack the face plate on the left (Trem/Vib side) on the #20084 A-4. Some of the underside paint appears to have come off, as well. Any suggestions on what I can do? I have an A-5 donor head that was sold to me by a friend on here; would the holes match up?

SDC

Born on the Baaaaayou (Ok, in Massachusetts)

Report message to a moderator

[Message index]

		Cracked A-4 Plexi By: Shaun_Musings on Wed, 24 January 2018 18:32
		Re: Cracked A-4 Plexi By: stevem on Thu, 25 January 2018 05:59
		Re: Cracked A-4 Plexi By: Shaun_Musings on Sat, 27 January 2018 17:56

Previous Topic:	K150 Wattage-Volts
Next Topic:	Reverb issue with 250 guitar head

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Jun 07 21:46:34 EDT 2024