VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Vintage 302 PA Cab speaker info
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Vintage 302 PA Cab speaker info [message #15333] Mon, 28 February 2011 20:50 Go to next message
beakmon is currently offline  beakmon
Messages: 1
Registered: February 2011
Junior Member
Greetings,
I recently opened my vintage Kustom 302 PA Cab to find out what speakers were inside. Besides the 2 12" Jensen C12Ns, there are 3 8" 'Kustom' speakers. Anyway of finding out the watts rating on these? Are they actual Kustom make or another brand?
Any info would be greatly appreciated Smile

Report message to a moderator

Re: Vintage 302 PA Cab speaker info [message #15364 is a reply to message #15333] Sat, 05 March 2011 14:02 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
Hello.
Kustom never made any of its drivers.
If they are labled Kustom I would guess that they where made by the then newly formed Eminence corp or CTS, and I would say that at best those 8 inchers where good for no more than 20 watts, heck those C12Ns where rated at 40 and I think that was optomistic!
If I had 5 cents for every 85 watt Fender Twin reverb that I have seen with blown C12Ns I would be semi rich!

Report message to a moderator

Re: Vintage 302 PA Cab speaker info [message #16388 is a reply to message #15364] Sun, 06 November 2011 19:22 Go to previous message
greg is currently offline  greg
Messages: 1
Registered: November 2011
Location: topeka ks
Junior Member
Howdy,I'm sort in the same boat as beakmon,as I have a pair of those 302 PA cabinets (no amp). Sounds like the Exact layout I have. My problem is I'm trying to find a replacement for 1 of the 8" speakers.(Thats mainly how I woulnd up here)The darn thing is 16 ohm and I would love to go OEM,but if need be I will substitute.Any help on finding a speaker would be greatly appreciated.Thanks,Greg

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: My K250-2 Refurb: What I used (with photos)
Next Topic: Replacement Handles on Ebay
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 15 08:36:55 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software