VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » K250-4 amp rebuild parts (need sources for amp rebuild devices (IC's etc.))
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K250-4 amp rebuild parts [message #27629] Thu, 09 January 2020 12:29
johnnysynth is currently offline  johnnysynth
Messages: 45
Registered: June 2018
Member
Hi:
I'm trying to source ALL the devices for a complete
pre-amp/amp rebuild for my K250-4 monster
I've replaced the two 'big can' electrolytics'
and I'm starting in on the two pre-amps
The first obscure part is one 14pin DIP dual op-amp
XR4739/nte725 uA739
The amp DOES work but it's noisey
and the high end distorts when I
play my Wurlitzer Electric Piano thru it

Jake Welsh
johnnysynth@yahoo.com
808 755-5886
Saint Augustine, FL 32084

1/9/20

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: looking for large PA 2 dot amp knobs
Next Topic: Cosmetically Excellent WHITE (SILVER) CABS & HEADS WTD.
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 05 13:16:30 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software