VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Licon switch replacement

Show: Today's Messages :: Polls :: Message Navigator

Re: Licon switch replacement [message #13495 is a reply to message #13464]

Thu, 29 April 2010 01:03

fairman36
Messages: 6
Registered: April 2010

Junior Member

Agreed again. And if the voltage across the super-bright LED in the K300/600 is about 2.2V like it was in my K250, that is actually about 50% of the rating, so it should last even foreverer. Incidentally, the Mouser part number for the DPDT super-bright switch for the K300/600 would be 633-UB26KKW016G-JB. As SteveM has pointed out, be sure and connect the poles together, then connect the normally open throw contacts together, then connect the normally closed throw contacts together.

Report message to a moderator

[Message index]

		Licon switch replacement By: Van on Tue, 30 March 2010 20:00
		Re: Licon switch replacement By: pleat on Tue, 30 March 2010 22:25
		Re: Licon switch replacement By: Van on Tue, 30 March 2010 23:03
		Re: Licon switch replacement By: pleat on Wed, 31 March 2010 07:15
		Re: Licon switch replacement By: Van on Wed, 31 March 2010 09:34
		Re: Licon switch replacement By: fairman36 on Wed, 14 April 2010 16:24
		Re: Licon switch replacement By: Van on Wed, 14 April 2010 17:11
		Re: Licon switch replacement By: fairman36 on Fri, 16 April 2010 14:58
		Re: Licon switch replacement By: Van on Fri, 16 April 2010 15:12
		Re: Licon switch replacement By: stevem on Tue, 20 April 2010 13:09
		Re: Licon switch replacement By: fairman36 on Thu, 22 April 2010 17:57
		Re: Licon switch replacement By: stevem on Fri, 23 April 2010 05:53
		Re: Licon switch replacement By: stevem on Fri, 23 April 2010 05:59
		Re: Licon switch replacement By: fairman36 on Fri, 23 April 2010 13:10
		Re: Licon switch replacement By: dndemattia on Sat, 11 September 2010 14:58
		Re: Licon switch replacement By: stevem on Fri, 23 April 2010 13:12
		Re: Licon switch replacement By: fairman36 on Sat, 24 April 2010 11:24
		Re: Licon switch replacement By: stevem on Mon, 26 April 2010 05:51
		Re: Licon switch replacement By: fairman36 on Thu, 29 April 2010 01:03
		Re: Licon switch replacement By: gdtaylor on Thu, 29 April 2010 17:26
		Re: Licon switch replacement By: stevem on Mon, 13 September 2010 09:29
		Re: Licon switch replacement By: dndemattia on Mon, 04 October 2010 10:49
		Re: Licon switch replacement By: chicagobill on Mon, 04 October 2010 14:32
		Re: Licon switch replacement By: dndemattia on Mon, 04 October 2010 17:45
		Re: Licon switch replacement By: chicagobill on Mon, 04 October 2010 18:16
		Re: Licon switch replacement By: dndemattia on Wed, 06 October 2010 11:32
		Re: Licon switch replacement By: stevem on Wed, 06 October 2010 12:20
		Re: Licon switch replacement By: dndemattia on Wed, 06 October 2010 12:49
		Re: Licon switch replacement By: stevem on Wed, 06 October 2010 14:40
		Re: Licon switch replacement By: chicagobill on Wed, 06 October 2010 17:21
		Re: Licon switch replacement By: dndemattia on Wed, 06 October 2010 17:46
		Re: Licon switch replacement By: chicagobill on Thu, 07 October 2010 12:02
		Re: Licon switch replacement By: richardojohnson on Wed, 26 August 2015 14:04
		Re: Licon switch replacement By: stevem on Wed, 26 August 2015 19:20
		Re: Licon switch replacement By: richardojohnson on Thu, 27 August 2015 15:26
		Re: Licon switch replacement By: stevem on Fri, 28 August 2015 06:18
		Re: Licon switch replacement By: richardojohnson on Wed, 02 September 2015 14:38
		Re: Licon switch replacement By: stevem on Thu, 03 September 2015 06:33
		Re: Licon switch replacement By: richardojohnson on Fri, 04 September 2015 15:21
		Re: Licon switch replacement By: stevem on Mon, 07 September 2015 07:03
		Re: Licon switch replacement By: richardojohnson on Mon, 07 September 2015 13:44
		Re: Licon switch replacement By: stevem on Tue, 08 September 2015 06:22
		Re: Licon switch replacement By: richardojohnson on Tue, 08 September 2015 13:22

Previous Topic:	Kustom K200D Bass Guitar tuners?
Next Topic:	Sidewinder Diode CR1 & CR2 replacement (part no: 007-6011-00)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue May 28 22:25:28 EDT 2024

.:: Contact :: Home ::.