VintageKustom.com: Repairing Kustom Amps » Speaker cabinet screw question, Please!

Home » VintageKustom.com » Repairing Kustom Amps » Speaker cabinet screw question, Please!

Show: Today's Messages :: Polls :: Message Navigator

Speaker cabinet screw question, Please! [message #8720]

Wed, 04 July 2007 17:03

tele68
Messages: 2
Registered: June 2007
Location: S.E. Georgia

Junior Member

Hi, I have a 2G-1H Kustom speaker cabinet. This has 2-15" speakers and 1- 18"x 9" HF horn. On the back panel there are two horizontal rows of screws, about 15" from bottom and top that don't attach to anything internally. Is there supposed to be a reinforcement piece of wood that these screw into? I can't seem to find any pictures of the internals of this cabinet so I'm at a loss. Any help would be appreciated! Thanks all.

Report message to a moderator

Re: Speaker cabinet screw question, Please! [message #8752 is a reply to message #8720]

Fri, 13 July 2007 06:27

stevem
Messages: 4747
Registered: June 2004
Location: NY

Senior Member

Yes .and these cross braces from the factory where only attached by one side, so if you make a new 2x4 cross brace do it the right way and toe screw it down at both ends.

Report message to a moderator

Previous Topic:	Need Help wiring 2G+1H cabinet H.F. horn.
Next Topic:	Replacing Speakers in 4-15c bass rig

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jun 24 21:10:25 EDT 2024