VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Impedance on 2X12 piggyback cab
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Impedance on 2X12 piggyback cab [message #13985] Fri, 18 June 2010 18:35 Go to next message
K100-2 is currently offline  K100-2
Messages: 1
Registered: June 2010
Location: TX
Junior Member
I got a line a 2X12 piggyback cab but need to know the impedance as the tube heads I have are 8 OHM.
Cab owner has know clue.

Report message to a moderator

Re: Impedance on 2X12 piggyback cab [message #13986 is a reply to message #13985] Fri, 18 June 2010 22:42 Go to previous message
LesS is currently offline  LesS
Messages: 477
Registered: December 2002
Senior Member
A 2 x 12 with original speakers should be 8 ohms, but the speakers could have been changed, so the only way to know for sure is to measure it with a multimeter.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Red K100
Next Topic: Vintage Kustom T&R Amp and Head
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 14 16:02:15 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software