Home » VintageKustom.com » Comment Board » K 250-4 amp
Re: K 250-4 amp [message #15597 is a reply to message #15596] Sat, 07 May 2011 21:09 Go to previous messageGo to previous message
pleat is currently offline  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
Very cool amp. They are really a good sounding and loud amp. The amp uses two 2 button footswitches, which are wired as a simple short to ground to turn off the effects. The boost wah pedal, I think uses a 10K lin taper pot and I don't remember how it's wired. It uses a stereo type 1/4" jack and the shield wire is grounded to the case of the pedal. The other two wire are wired to center lug and one of the outside legs of the pot. Hope maybe someone else might have a schematic of the wah pedal.
pleat
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Amp model identification
Next Topic: K-250-4 Output
Goto Forum:
  


Current Time: Thu May 30 11:36:09 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.