VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » 250-4 (got it burnt up to repair on my bech)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: 250-4 [message #28636 is a reply to message #28618] Fri, 24 June 2022 15:47 Go to previous messageGo to previous message
kb0rex is currently offline  kb0rex
Messages: 33
Registered: June 2022
Member
hi Steve acouple of days ago I had the board out when doing initial repairs and when reinstalled notice crap from the connector and when I inspected the board all 3 pins were iffy and totally loose and wiggled to the touch. I did reflow those a couple of days back. When I was fixing the effects board i noticed the only ground path was pin 2 of the molex.. don't really like that engineering but it is what it is. When I was tracing signal I had the connector apart but made sure I jumpered the ground path into pin 2. I swapped the differental transistors to pnp bc556 to no effect seems the same. maybe a little quiter. have not changed out q3.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200 Bright Channel is ALIVE...
Next Topic: Krossroad 500 "pops" when powered off
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 06 15:08:16 EDT 2024