|
|
Re: Cabinet conversion complete !! 3-12 to 2-10 + 2-12 [message #14680 is a reply to message #14679] |
Tue, 02 November 2010 14:25 |
braud357
Messages: 154 Registered: July 2010 Location: Louisiana
|
Senior Member |
|
|
Thank you Steve ! I will be using it for bass. My original plan was to use both of my K200 heads (a B1 & a B5) - one for the 10's and one for the 12's. This has been problematic ! I have tried all sorts of ways (channel bridging, y-cords, line out) to couple these heads, and none have proven satisfactory. If I add any amount of volume (past 3), the heads go microphonic, and feedback like crazy. The line out actually worked the best, going into the imput of the other head, but the problem still persists. And, they do not like being stacked on top of each other - they hum like crazy ! I will figure something out, because the cabinet sounds awesome. I was looking for a tight, punchy sound, with strong fundamentals - and it delivers !!
|
|
|
Re: Cabinet conversion complete !! 3-12 to 2-10 + 2-12 [message #14681 is a reply to message #14677] |
Tue, 02 November 2010 14:36 |
stevem
Messages: 4745 Registered: June 2004 Location: NY
|
Senior Member |
|
|
I can understand the hum happening when you stack the heads as the power transfomers are them pumping their 60 Hz magnetic flux into each others circuits, but the Microphonics is odd.
I will put some thought into the problem and get back to you.
|
|
|