VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Kustom 250-2 Footswitch
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom 250-2 Footswitch [message #5961] Thu, 14 July 2005 22:52 Go to next message
baskerville is currently offline  baskerville
Messages: 9
Registered: June 2005
Location: Ottawa/Hull
Junior Member
Hello,

Can someone describe to me the type of footswitch that was used on the Kustom 250 Series of amps? There is a XLR type connector on the back of the Amp. Is this where the footswitch connected? And if so, where can I find a replacement?

THanks. Bye-for-now.

Report message to a moderator

Re: Kustom 250-2 Footswitch [message #5962 is a reply to message #5961] Fri, 15 July 2005 08:18 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
Hi, A replacement you will not find, but if you hunt on ebay, or get a copy of vintage guitar mag and call up a bunch of shops and put the word out they may beable to turn up one.I have a 250 amp and a schematic(the head does not have fuzz or wah) if I get the time over the week end, I will take a look and see if I can tell you how to wire up(make your own) ft swt, but let me know if you have the head with fuzz and wah, or just vibrato/tremlo and reverb.

Report message to a moderator

Re: Kustom 250-2 Footswitch [message #5965 is a reply to message #5962] Fri, 15 July 2005 19:00 Go to previous messageGo to next message
baskerville is currently offline  baskerville
Messages: 9
Registered: June 2005
Location: Ottawa/Hull
Junior Member
My head is the 250 Model - 2. So, there is no fuzz or wah. Just Reverb, Tremolo and Vibrato. If you can pull together a schematic, that would be great.

Thanks very much. let me know.

Report message to a moderator

Re: Kustom 250-2 Footswitch [message #5991 is a reply to message #5962] Mon, 25 July 2005 23:40 Go to previous message
baskerville is currently offline  baskerville
Messages: 9
Registered: June 2005
Location: Ottawa/Hull
Junior Member
Hi There,

Did you have any luck finding the schematic for the Kustom 250-2?

Let me know. Bye-for-now.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: 315 J-4 foot switch for effects etc?
Next Topic: k200b-2 footswitch
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jun 10 08:41:46 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software