Re: Kustom Studio 4 valve amp or K100-C-8 2x10.....?? [message #14147 is a reply to message #14144] |
Thu, 29 July 2010 14:47 |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
Send them pictures and ask for a price reduction. No harm in trying. On this site we typically talk more vintage stuff. Tuck and roll from the 60's and early 70's. But that doesn't mean you are not welcome. Absolutely. You have seen that already. It's like a car. If the engine or transmission is blown, it can be fixed. But if the body is shot, then the boneyard is probably in order unless it's a 65 Mustang. If you think that you can repair the cabinet or have someone do it for you, then the amp should be easy. Just realize that not powering up it THE most BASIC problem you could have. Maybe a defective fuse from a blow to the cabinet or a dislodged connector. After that, guys on this site can steer you in the right direction. I have bought amps knowing that the amp doesn't work, just needs a good cabinet. Welcome and good luck!
Conrad
|
|
|