VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Kustom pedal (K-250 head)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom pedal [message #26063 is a reply to message #26043] Wed, 19 April 2017 16:03 Go to previous messageGo to previous message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
The readings I get between the first ring and middle ring.....OL; reading between first ring and tip.....OL; reading between middle ring and tip.........31K with pedal extended, 13K when pedal is fully depressed. The pot is wired with the shielded cable soldered to pot casing; white wire from tip to the first terminal on the left on the pot; the black wire is connected to the far right terminal on the pot and there is a jumper between this terminal and the middle terminal. Black wire is the middle ring.


Like I've said the selective tone control, 1 thru 3 you do notice a slight variation in pitch, but 4 to 6 not so noticeable. Effect pot is turned all the way up.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K100C-8 vs K150-8
Next Topic: Information Wanted
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Jun 09 16:43:46 EDT 2024