VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Schematic for Pc702 output board needed
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Schematic for Pc702 output board needed [message #13679] Mon, 17 May 2010 16:40
HaenC is currently offline  HaenC
Messages: 5
Registered: May 2010
Location: Germany
Junior Member
Hey Guys,

i'm new here and I'm looking for the schematic from the pc702 board.i've got a K200 A amp here and one 100ohm res got fried twice...would Be great if anyone could send me some schems,as i was unable to find any

greets
HaenC

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K200-B5 - One channel is dead. . .
Next Topic: Frankenstien ID & schematics needed
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 13 07:08:00 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software