stevem Messages: 4742 Registered: June 2004 Location: NY
Senior Member
Hi, The 14 pin dip is a ecg714 of which mouser electronics used to carry up untill early last year, but their are many n o s supplyers that carry this chip if you do a search by its ecg714 part number. The only question is what is their minimum if any dollar order.
Their is some thing you can use for the 40841 but I do not have my info here at work with me, but I can get back to you on Wensday if other folks like BC here has not helped you out by than.
gibsonripper Messages: 6 Registered: February 2008 Location: Portland, OR
Junior Member
Thanks for the reply... but for some reason Mouser is crossing ECG714 to NTE714 which can't be possible, because it says it is a "Chroma Subcarrier Regeneration" chip?!?
If you search the board, I posted a small list of Kustom semi-conductors, with generic or ecg replacements where available. It will contain the two items that you are looking for, as well as a number of other obsolete devices.
gibsonripper Messages: 6 Registered: February 2008 Location: Portland, OR
Junior Member
Thanks Bill,
I'll search for it very soon... (I did a search yesterday using keywords including specifically the parts standard numbers and found nothing, but I will look again using different criteria).
Thanks again for the help/feedback/suggestions,
Eric