VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » Licon switch replacement
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Licon switch replacement [message #14517 is a reply to message #13322] Wed, 06 October 2010 12:20 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
That switch will do nothing once you do what should be done to the and that is to replace the two conductor ac cord with a 3 cnductor cable that will have the green ground wire bolted down to the chassie.
This will properly ground the amp.
Its lamp will turn on when the power switch is pushed on.

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom K200D Bass Guitar tuners?
Next Topic: Sidewinder Diode CR1 & CR2 replacement (part no: 007-6011-00)
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 14 20:35:50 EDT 2024