VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Woodson 150-2 (Bulb)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Woodson 150-2 [message #28034] Wed, 17 February 2021 07:39 Go to previous message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member
Someone who is good at Math and figuring out Ohm's Law, I need to know the voltage of the Power Indictator Bulb if it is fed by a 2.2K Resistor as a fuse.
I also have a mixing board that is also fed by a resistor which I'm working on later...
This bulb is grounded one leg and then the other leg is fed into the board right by this 2.2K Resistor..
Any info. ?

Report message to a moderator

[Message index]
 
Read Message
Read Message
Previous Topic: Repairing A Kustom 100 4 CH PA head
Next Topic: Repairing Kustom 200 4 CH PA head
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 07 01:21:28 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software