VintageKustom.com: Repairing Kustom Amps » dc voltage at the output

Home » VintageKustom.com » Repairing Kustom Amps » dc voltage at the output

Show: Today's Messages :: Polls :: Message Navigator

Re: dc voltage at the output [message #22381 is a reply to message #22351]

Thu, 05 February 2015 23:52

chicagobill
Messages: 2005
Registered: April 2003

Senior Member

Well, it sounds like the wrong person was working on your amp. Does it look like there have been any other changes done to the board? You may need to check the board against the schematic and see if anything else has been messed with.

I think that the board itself is grounded by the pot mounting nuts on certain pots. Have you cleaned the chassis and star washers at the mounting points? How about the where the pot mounts to the pc board?

Report message to a moderator

[Message index]

		dc voltage at the output By: smackoj on Wed, 04 February 2015 10:35
		Re: dc voltage at the output By: chicagobill on Wed, 04 February 2015 12:42
		Re: dc voltage at the output By: smackoj on Wed, 04 February 2015 13:41
		Re: dc voltage at the output By: chicagobill on Wed, 04 February 2015 15:06
		Re: dc voltage at the output By: smackoj on Wed, 04 February 2015 16:18
		Re: dc voltage at the output By: chicagobill on Wed, 04 February 2015 16:39
		Re: dc voltage at the output By: smackoj on Wed, 04 February 2015 17:47
		Re: dc voltage at the output By: smackoj on Wed, 04 February 2015 19:40
		Re: dc voltage at the output By: smackoj on Thu, 05 February 2015 09:49
		Re: dc voltage at the output By: stevem on Thu, 05 February 2015 11:10
		Re: dc voltage at the output By: chicagobill on Thu, 05 February 2015 12:32
		Re: dc voltage at the output By: smackoj on Thu, 05 February 2015 17:24
		Re: dc voltage at the output By: chicagobill on Thu, 05 February 2015 17:35
		Re: dc voltage at the output By: smackoj on Thu, 05 February 2015 17:57
		Re: dc voltage at the output By: pleat on Fri, 06 February 2015 19:27
		Re: dc voltage at the output By: chicagobill on Thu, 05 February 2015 23:52
		Re: dc voltage at the output By: stevem on Fri, 06 February 2015 06:18
		Re: dc voltage at the output By: smackoj on Fri, 06 February 2015 08:47
		Re: dc voltage at the output By: smackoj on Fri, 06 February 2015 10:08
		Re: dc voltage at the output By: chicagobill on Fri, 06 February 2015 12:49
		Re: dc voltage at the output By: smackoj on Fri, 06 February 2015 17:42
		Re: dc voltage at the output By: chicagobill on Sat, 07 February 2015 00:39
		Re: dc voltage at the output By: smackoj on Sat, 07 February 2015 04:52
		Re: dc voltage at the output By: stevem on Sat, 07 February 2015 07:39
		Re: dc voltage at the output By: smackoj on Sat, 07 February 2015 10:28
		Re: dc voltage at the output By: chicagobill on Sat, 07 February 2015 11:56
		Re: dc voltage at the output By: smackoj on Sat, 07 February 2015 12:57

Previous Topic:	K-250
Next Topic:	Replacing broken plastic handles?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jun 17 19:05:29 EDT 2024