VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » K100B-5 (Greenpea Here...)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K100B-5 [message #25904 is a reply to message #25801] Mon, 13 February 2017 13:01 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
Great to hear. Start by cleaning all of the pots. I suggest using DeoxIt brand cleaner, it's the best that I've used.

The reverb only turns off with the footswitch, so don't use one for now. The first thing to do is to test the reverb tank itself. Disconnect the reverb tank wires from the pc board side. Set your meter to read resistance, use the 2,000 ohms scale. Read the resistance across the ends of the RCA plugs. You should get a reading of about 180 ohms or so on both plugs.

If you get OL readings on either end, check to be sure that the cables are making good contact. If one or both sides still read open, you'll have to remove the black foam rubber cover from the open side of the tank to inspect the small wires that connect the transducer coils to the RCA jacks. These wires often break from flexing. If you find any broken ones, resolder them and test the resistances again. Once you know that the tank is okay, plug it back in and retest the reverb function of the amp.

Channel 4 may get better after the amp has been on for a while. See what happens after cleaning the pots and testing the reverb tank.
[Message index]
 
Read Message icon10.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Speaker cables
Next Topic: K200B-1 Bright switch kaput
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 13 07:27:02 EDT 2024