VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Burnt PC900 (need parts ID'd)

Show: Today's Messages :: Polls :: Message Navigator

Burnt PC900 [message #23270]

Sun, 05 July 2015 19:56

dacflyer
Messages: 17
Registered: July 2015
Location: Fayetteville NC

Junior Member

i am working on a K100-5 Pa AMP
the PC900 board has burnt resistors and i am unable to ID them and the PC900 schematic i have does not seem to match up with the board i am using. can anyone give me any help?
i do have a lot of electronics experience. so far i have found that someone has worked on this before and they did horrible work on it.
the output transistors are shorted, and a few other parts are also blown.
i do not see how to post any fotos here.
thanks for anyone that can help...

Report message to a moderator

[Message index]

		Burnt PC900 By: dacflyer on Sun, 05 July 2015 19:56
		Re: Burnt PC900 By: chicagobill on Sun, 05 July 2015 23:05
		Re: Burnt PC900 By: dacflyer on Mon, 06 July 2015 18:59
		Re: Burnt PC900 By: chicagobill on Mon, 06 July 2015 20:58
		Re: Burnt PC900 By: dacflyer on Tue, 07 July 2015 19:13
		Re: Burnt PC900 By: stevem on Tue, 07 July 2015 19:30
		Re: Burnt PC900 By: chicagobill on Wed, 08 July 2015 15:11
		Re: Burnt PC900 By: pleat on Wed, 08 July 2015 16:27
		Re: Burnt PC900 By: stevem on Wed, 08 July 2015 19:22
		Re: Burnt PC900 By: dacflyer on Mon, 13 July 2015 07:45
		Re: Burnt PC900 By: stevem on Mon, 13 July 2015 10:11
		Re: Burnt PC900 By: dacflyer on Tue, 28 July 2015 21:01
		Re: Burnt PC900 By: stevem on Wed, 29 July 2015 06:38
		Re: Burnt PC900 By: chicagobill on Wed, 29 July 2015 12:16
		Re: Burnt PC900 By: dacflyer on Wed, 29 July 2015 19:33
		Re: Burnt PC900 By: stevem on Wed, 29 July 2015 19:57
		Re: Burnt PC900 By: chicagobill on Thu, 30 July 2015 10:51
		Re: Burnt PC900 By: dacflyer on Thu, 30 July 2015 14:48
		Re: Burnt PC900 By: stevem on Fri, 31 July 2015 06:33
		Re: Burnt PC900 By: dacflyer on Fri, 31 July 2015 14:39
		Re: Burnt PC900 By: chicagobill on Fri, 31 July 2015 15:19
		Re: Burnt PC900 By: dacflyer on Sat, 01 August 2015 16:29
		Re: Burnt PC900 By: stevem on Sat, 01 August 2015 05:58
		Re: Burnt PC900 ( UPDATE ) Success it is working again. By: dacflyer on Mon, 28 December 2015 15:07
		Re: Burnt PC900 By: chicagobill on Tue, 29 December 2015 00:16
		Re: Burnt PC900 By: dacflyer on Tue, 29 December 2015 09:55
		Re: Burnt PC900 By: stevem on Tue, 29 December 2015 11:20
		Re: Burnt PC900 By: chicagobill on Tue, 29 December 2015 11:30
		Re: Burnt PC900 By: C4ster on Tue, 29 December 2015 12:55

Previous Topic:	Kustom V Lead
Next Topic:	K200A Head Cabinet Questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jun 12 20:28:32 EDT 2024