|
Re: K200A-2 TREM/VIB FOOTSWITCH MODIFICATION [message #18247 is a reply to message #18246] |
Wed, 20 February 2013 01:14 |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
You need to ground the wires on the footswitch jack to turn on the effects.
You can do this by buying a plug and wiring it to short the pins when it is inserted into the jack. This way if you want to turn off the effects you can just pull out the plug.
Or you can open up the amp and solder small jumpers on the back side of the jack grounding out the wires.
|
|
|
|
|
|
|