VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Active Bass and K250 preamp damage
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Active Bass and K250 preamp damage [message #27964] Wed, 20 January 2021 07:45 Go to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
Well over a year ago now while at rehearsal and using one of my basses with a 18 volt active preamp I damaged my selectone channel in one of my K250 heads when it started to produce a ton of hiss.

Just over the weekend I got to look into the issue and had to replace the 14 pin duel section IC chip to fix it.

So you folks with active preamps in your guitars and or using stomp boxes that can add to signal input levels in to the amp beware of driving these 250 and K150 heads with too much signal into them!

These amps where not made to need that hot a input signal level to drive them to full output wattage.

[Updated on: Wed, 20 January 2021 07:48]

Report message to a moderator

Re: Active Bass and K250 preamp damage [message #29239 is a reply to message #27964] Sun, 05 May 2024 19:49 Go to previous messageGo to next message
Default is currently offline  Default
Messages: 2
Registered: May 2024
Junior Member
I occasionally run a 9v Stingray thru my 250, rarely above 9oclock on the volume and into the "passive" input. SO FAR no issues, but I'm also not playing for long as I'm just messing about. I do find that even with my passive basses it seems like I'm "overdriving" the head, as the tone seems to shift and not be quite as good past a certain volume, but Im also new and may be dialing things in wrong.
Re: Active Bass and K250 preamp damage [message #29241 is a reply to message #27964] Tue, 07 May 2024 06:48 Go to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
In 72 due to complaints from guitar player a circuit change was put in place on the 250 and 150 amps to provide more gain.

This worked great for the guitar player, but I find that for bass I like the pre 72 non mod better , there more dynamic range for bass use and as such less chance of driving the amp into clipping

If you have one of these amps it's all of 5 bucks worth of parts to put it back to it original production form.

Another thing that helps when you have a active bass with hot output is to run the volume on the bass down to 3/4s or less and turn the amp up more.
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K250-1 bulbs in switches
Next Topic: Repair Inquiry
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Oct 31 19:33:17 EDT 2024