VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Lack of potential

Show: Today's Messages :: Polls :: Message Navigator

Lack of potential [message #11721]

Mon, 31 August 2009 20:44

JLElectric
Messages: 12
Registered: August 2009
Location: Holly Ridge, NC

Junior Member

My k200b1 doesnt have the boost pushing two 15's. It sounds a little distorted. What will cause that?

Report message to a moderator

Re: Lack of potential [message #11726 is a reply to message #11721]

Tue, 01 September 2009 11:38

chicagobill
Messages: 2005
Registered: April 2003

Senior Member

There could be any number of reasons for the lack of power.

Start by figuring out where the problem circuit is. Are both preamp sides weak?

Do you have a multimeter? If you do, what are the voltages of the main dc power supply? Attach the black lead of your meter to the chassis and use the red one to read the voltages at the terminals of the two large filter cap cans.

You will be working on a live circuit here, so use caution.

There should be about + and - 40Vdc at the filter caps.

Let us know what you find.

Report message to a moderator

Re: Lack of potential [message #11729 is a reply to message #11726]

Tue, 01 September 2009 19:06

JLElectric
Messages: 12
Registered: August 2009
Location: Holly Ridge, NC

Junior Member

I gave up, I took to someone who knows what they are looking at. Thanks for the help.

Report message to a moderator

Previous Topic:	k200b1 keeps blowing fuses
Next Topic:	Part of my Kustom K 100C-8 blew

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jun 23 05:19:42 EDT 2024