VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Altec driver replacement (Emminence PSD 2002-8/16)

Show: Today's Messages :: Polls :: Message Navigator

Altec driver replacement [message #27579]

Sun, 10 November 2019 08:56

johnnysynth
Messages: 46
Registered: June 2018

Member

This emminence driver handles 80W with frequency response of 1.2K to 20K
It probly bolts right up to an Altec 811B horn which
looks like what was in the old T&R cabs equiped with HF drivers.
Don't really know what Bud used for a crossover. The
Altec brand would have probly been a N800-D 800hz unit.
I'm going to try this out myself so I thought I'd put this
idea out here for discussion. The mystery is. . .what X-over
to use?
I'm trying to'PUT' one
of these cabs together from separate modern parts
to wind up with the original T&R cab but with
JBL K130's and one of these modern Emminence drivers.
By theory at least it should kick ass.
Jake Welsh- johnnysynth@yahoo.com

Report message to a moderator

[Message index]

		Altec driver replacement By: johnnysynth on Sun, 10 November 2019 08:56
		Re: Altec driver replacement By: pleat on Sun, 10 November 2019 15:35
		Re: Altec driver replacement By: johnnysynth on Mon, 11 November 2019 07:41
		Re: Altec driver replacement By: pleat on Mon, 11 November 2019 15:53

Previous Topic:	3055 vs 3771 power transistors
Next Topic:	Hustler Reverb Tank

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 10 13:03:12 EST 2024