VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Hustler Reverb Tank (Input output impedance)

Show: Today's Messages :: Polls :: Message Navigator

Hustler Reverb Tank [message #27584]

Mon, 11 November 2019 22:40

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Ok, got a Hustler head out of a "destroyed" 4x10 combo. Issue no reverb tank. Searched the forum...first step right?...and ran into a quandary. Differing recommendations for the suitable replacement. I know the tanks for the metal face amps have different impedance than the plexi amps because they are fed by an op amp ic instead of discrete transistors. I know the output impedance should be 2250 ohms that is a B code for Accutronics pans so my part number is complete except for the discrepancy with the input impedance. One recommendation is F- which is 1465 ohm impedance the other is B- which is 150 ohm impedance. So my question is what do I really need? Help.
4FB3C1B or 4BB3C1B
Both are type 4 with long decay (yep that is what I want) input isolated output grounded no lock open bottom horizontal mount.
Thanks in advance. A reply from someone with a Hustler that has successfully replaced the pan would be great.
Steve? Bill? Anyone?

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Mon, 11 November 2019 22:44]

Report message to a moderator

[Message index]

		Hustler Reverb Tank By: JDinPA17603 on Mon, 11 November 2019 22:40
		Re: Hustler Reverb Tank By: stevem on Tue, 12 November 2019 07:31
		Re: Hustler Reverb Tank By: JDinPA17603 on Tue, 12 November 2019 09:19
		Re: Hustler Reverb Tank By: chicagobill on Tue, 12 November 2019 11:49
		Re: Hustler Reverb Tank By: JDinPA17603 on Tue, 12 November 2019 12:28
		Re: Hustler Reverb Tank By: carlc on Wed, 13 November 2019 08:15
		Re: Hustler Reverb Tank By: JDinPA17603 on Mon, 09 December 2019 16:35
		Re: Hustler Reverb Tank By: stevem on Tue, 12 November 2019 12:32
		Re: Hustler Reverb Tank By: JDinPA17603 on Tue, 12 November 2019 19:33

Previous Topic:	Altec driver replacement
Next Topic:	K200B-6

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jun 16 18:14:27 EDT 2024