VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom III lead pc board 5065 rev2 [message #27389 is a reply to message #27382] Fri, 14 June 2019 22:17 Go to previous messageGo to previous message
podbaydoors is currently offline  podbaydoors
Messages: 7
Registered: June 2019
Junior Member
Working great!

Replaced all electrolytic caps.
Using it into a 2x12 cab loaded with eminence redcoats.
The two inputs are significantly different in response.
The distortion afforded by the overdrive in channel a is really nice.
The white noise level it quite tolerable.
Most of my buddies are tube snobs, not me.
I just know what I like.
I need to make an A/B that grounds the unused side, that'll work well with this puppy.
Only gripe is with the small accutronics spring tank, could've been larger.
I had forgotten how much I like Kustom gear.
Now I have another collection about to happen!

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 100 blowing fuse
Next Topic: Troubleshooting a 250 model 1 Bass amp
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Jun 09 05:54:59 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software