VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K100-2 (Kill the treble boost)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K100-2 [message #28195] Wed, 21 April 2021 18:21
stevem is currently offline  stevem
Messages: 4744
Registered: June 2004
Location: NY
Senior Member
Many times folks find the one single channel of the K100-2 too darn brite , but there is a simple mod that can be done to bypass the treble boost circuit and have it sound like the normal channel of the k100-1 amp.

The deal is to lift c114 and r127 where it connects to the Emitter ( output ) of Q105, then lift the negative end of c119 off the board and then just jump the output of Q105 to the lifted end of c119 and your Golden!

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K200 B1 fuse value
Next Topic: Cant remember washer placement
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 05 11:41:46 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software