VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » K100B-5 (Greenpea Here...)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K100B-5 [message #25848 is a reply to message #25847] Thu, 02 February 2017 17:22 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
Just solder the new white lead to the same spot that the original white wire was connected and the new black wire to the same spot that the original black wire was.

When you replace the power cord, you should remove the ground cap from the power switch and use that ground connection on the chassis for the green ground wire of the new cord.
[Message index]
 
Read Message icon10.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Speaker cables
Next Topic: K200B-1 Bright switch kaput
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 13 19:56:15 EDT 2024