VintageKustom.com: Replacement Part Suggestions » kustom 24-L reverb tank placement

Home » VintageKustom.com » Replacement Part Suggestions » kustom 24-L reverb tank placement (kustom 24-L reverb tank placement)

Show: Today's Messages :: Polls :: Message Navigator

kustom 24-L reverb tank placement [message #19464]

Sun, 29 September 2013 15:22

dallek1
Messages: 10
Registered: May 2013
Location: new york

Junior Member

My amp came without a tank it's a hustler 24-l the metal face. I could not find any previous holes in the speaker where it was previously mounted, can anyone tell me where it originally went ?

thanks
ns

Report message to a moderator

Re: kustom 24-L reverb tank placement [message #19465 is a reply to message #19464]

Sun, 29 September 2013 16:17

Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN

Senior Member

If I recall correctly, it was inside a Naugahyde bag that layed in the bottom of the inside of the amp and the RCA cables ran from out of the bag to the head.

Report message to a moderator

Re: kustom 24-L reverb tank placement [message #19466 is a reply to message #19465]

Sun, 29 September 2013 16:56

dallek1
Messages: 10
Registered: May 2013
Location: new york

Junior Member

Kustom_Bart wrote on Sun, 29 September 2013 16:17

If I recall correctly, it was inside a Naugahyde bag that layed in the bottom of the inside of the amp and the RCA cables ran from out of the bag to the head.

the bag thats what i forgot, its a bit sensitive screwed in with soft rubber gromits for suspension, but good bottom is my choice thanks

Report message to a moderator

Previous Topic:	Should I buy this for bass?
Next Topic:	Foot switch for K150

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 06 06:31:13 EDT 2024